Pembroke's college-town homes sit on brick piers over sandy crawl spaces and under vented attics that bake in the North Carolina heat, and most of them were built when energy efficiency meant opening a window.
Fayetteville Spray Foam Insulation has been serving Pembroke and the surrounding Fayetteville area since 2012. We know the old frame houses around town, the moisture that creeps into crawl spaces during humid summers, and the attics where ductwork struggles to cool a bedroom or keep a bathroom warm. We also know which homes need insulation removed before anything new goes in, and which ones just need the right foam in the right places to stop the leaks.
Spray Foam Insulation in Pembroke (28372)
Pembroke's housing stock tells the story. You have older frame houses with empty wall cavities and brick piers holding them above sandy soil, where moisture wicks up into the crawl space and humidity settles into the insulation. You have attics where the air handler and ductwork sit in a vented space that hits 130 to 150 degrees on a summer afternoon, and the R-value in that attic was never much to begin with. You have homes where the original insulation has settled, gotten damp, or been contaminated and now has to come out before any new work can happen. And you have rental properties that turn over with military moves, where the HVAC system is working overtime to condition a finished room over the garage that was never designed to be cooled.
The challenge in Pembroke is moisture first, then heat loss. Humidity and the Cape Fear River valley climate mean that crawl space condensation, damp insulation, and visible mold are not rare. Before we spray any foam, we fix the moisture or we walk away. Closed-cell spray foam stops air leaks and vapor transmission in one pass. Open-cell foam is lighter on the budget and works well in attics where ventilation is already in place. Both require the right substrate, the right thickness, and the right installation technique. We have been doing this work in this climate since 2012.
Our services in Pembroke
- Attic Spray Foam Insulation in Pembroke · Open-cell foam on the roof deck turns a 150°F Fayetteville attic into…
- Closed Cell Spray Foam Insulation in Pembroke · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
- Open Cell Spray Foam Insulation in Pembroke · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
- Wall & Injection Foam Insulation in Pembroke · Injection foam fills closed walls through small drilled ports, no demolition.
- Crawl Space Spray Foam Insulation in Pembroke · Closed-cell foam on crawl space walls and rims holds back humid air over sandy…
- Rim Joist & Band Joist Spray Foam in Pembroke · Crawl space rims, cantilevers and floors over garages leak conditioned air at…
- Garage Spray Foam Insulation in Pembroke · Garage ceilings under bonus rooms and shared house walls get sealed against…
- Metal Building & Barndominium Spray Foam in Pembroke · Closed-cell foam is the insulation that stops a Carolina metal building from…
- Commercial & New Construction Spray Foam in Pembroke · Warehouses; offices; churches and production builders served on schedule.
- Insulation Removal in Pembroke · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
- Insulation Replacement & Re-Insulation in Pembroke · The full reset: old material removed; gaps air-sealed…
- Air Sealing in Pembroke · Top plates; can lights; chases; knee walls and attic hatches leak more cooled…
How a Job Works in Pembroke
We start with a free on-site assessment. You tell us what is uncomfortable, what is costing too much to heat or cool, or what you have seen that worries you. We walk the attic, the crawl space, the walls if we can access them, and we look at what is already there. We take measurements, we talk about R-value and thickness, and we explain what code requires at your address. We give you a written estimate with the R-value and thickness specs so you know exactly what you are paying for.
On the day of the work, we set up mechanical ventilation to keep the air moving during cure. We spray the foam to the thickness we specified, in passes that let it rise and set correctly. If insulation has to come out first, we remove it carefully and haul it away. We protect your HVAC, your ductwork, and anything else that should not be sprayed. We work around occupied rooms and respect the re-entry window of twenty-four to forty-eight hours before the space is fully usable again.
When we are done, we clean up. You get a walkthrough, we answer your questions, and we leave your property in the condition we found it, minus the air leaks.
Attic spray foam in Pembroke typically runs from $1.50 per square foot for open-cell to $1.20 per board foot for closed-cell, depending on the thickness and R-value you need. A crawl space job starts around $2,500 and goes up with the square footage and whether moisture remediation is required first. Wall injection foam for closed walls runs from $2 per square foot. If old insulation has to come out, plan on $950 and up. Rim and band joist sealing starts at $650. The real cost drivers are the area you are treating, the R-value and thickness you need to meet code, whether you choose open or closed cell, and whether existing insulation has to be removed first. Every property is different. We give you a free estimate at (472) 263-8386, with no obligation and no sales pressure. You will get a written spec with R-value and thickness so you know what you are paying for.
✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Pembroke and nearby areas.
